Expert Microwave Engineering Consulting Services
Microwave Engineering is one of the core competencies for SiberSci, LLC, and SiberSci, LLC provides clients with services for optimizing the performance of existing microwave circuits, as well as providing research, design, development, and optimization of new:
- Microwave Devices, Circuits, Assemblies, Subsystems, and Systems.
- Microwave Power Combiners and Splitters.
- Microwave Cavities, and Microwave Resonators.
- Microwave Filters.
- Microwave Amplifiers and Oscillators.
- Microwave Impedance Matching Circuits.
- Microwave Transmission Line Networks.
- Coaxial, Rectangular, Cylindrical, Elliptic, and Ridged Waveguide.
- Planar Microstrip, Stripline, Co-Planar Waveguide, and Finline Circuits.
- Microwave Material Properties.
Contact SiberSci, LLC today to start work on your Microwave project.
Expert Microwave Engineering Consulting Services
Microwave energy was created with the birth of the Universe 13.7 billion years ago as proven by radio astronomers and satellite telescopes. The microwave signature left by the birth of the Universe illustrates the importance of understanding and solving Microwave Engineering problems to satisfy a plethora of applications in the 21st century. The applications for Microwave Energy increase with demand from mankind, so this field of engineering has expanded rapidly over the past decade. However, experience with solving Microwave Engineering problems analytically and numerically is extremely important, which is the service provided by SiberSci, LLC. Numerical results are questioned to ensure that the model parameters and boundary conditions are properly enforced, so analytical techniques must be used to validate the results provided by every numerical simulation. This important step is often overlooked by those inexperienced with solving Microwave Engineering problems, which results in wasted time and money when faulty results are used to fabricate prototypes that do not work. SiberSci, LLC‘s extensive experience prevents this from happening.
SiberSci, LLC provides Microwave Consulting resources for a wide range of circuit topologies. SiberSci, LLC provides services for the theoretical analysis, design, development, fabrication, testing, validation, and optimization of:
- transmission lines (microstrip, stripline, coplanar waveguide, coax, rectangular waveguide, cylindrical waveguide, elliptic waveguide,…),
- filters (lowpass, bandpass, highpass, band reject,…),
- resonators (coaxial, cylindrical, rectangular, clam-shell, dielectric,…),
- delay lines,
- phase shifters,
- impedance-matching circuits,
- dielectric lenses,
- Signal Integrity (SI) analysis,
- LDMOS, GaN, SiC, and GaAs power amplifiers, low-noise amplifiers (LNAs), and application-specific amplifiers,
- Load-Pull Optimization of amplifier active device performance.
- Temperature stabilized GUNN diode oscillators,
- RF, microwave, millimeter-wave and THz dielectric characterization of temperature-dependent complex permittivity and permeability of plasmas, powders, liquids, and solids, and
- systems analysis.
Our experience allows us to review both your performance specifications and size constraints for the defined microwave hardware, from which SiberSci, LLC can make recommendations for one or more hardware configurations to satisfy these requirements. SiberSci, LLC can also review proprietary performance specifications, size constraints, and client proposed hardware configurations to determine if these concepts are suitable for the intended application, or determine if the design concept must be modified to satisfy the stated requirements.
Performance and physical limitations for each design concept will be documented during the review process, and modifications to each design concept will be documented to illustrate how a design concept must be adapted to satisfy the performance and size limitations. If some portion of the performance or size specification is found to be physically impossible to achieve, then these problem areas are revealed along with recommendations to circumvent these barriers to achieving the requisite performance.
SiberSci, LLC is experienced using Ansys HFSS as part of the Ansys Electronics Workbench, CST Microwave Studio as part of the CST Studio Suite, FEKO, Comsol, SONNET Software, and Keysight ADS and Genesys to support the Computational ElectroMagnetics (CEM) aspects of these programs. Clients can specify the use of one or more of these CEM tools for their project as long as the client provides a valid license for using the code, or pays for contract access to the code of choice. If the client is unable to select the appropriate CEM code for their project, then SiberSci, LLC is prepared to assist each client with selecting the appropriate CEM codes(s) to ensure the success of their project.
It is important for each client to realize that the accuracy of CEM simulations are dependent upon the frequency and temperature-dependent material properties (thermal conductivity, complex permittivity, relative permittivity, loss tangent, electrical conductivity, density, specific heat,…) of the metals and dielectrics used for fabricating their circuits, so these material properties must be measured so they can be included in the CEM simulations. Laboratory and contract resources are available to determine these material properties, which are essential for providing accurate CEM simulations of both circuits and systems. SiberSci, LLC provides each client with the capability to only use valid material properties for their CEM simulations.
Are You Ready To Contact Us?
We can start work on your project today, so please submit your inquiry for a Microwave Consulting project to Dr. Scott Best, and specifically state if a Non-Disclosure Agreement (NDA) is required to protect your business-sensitive information, Intellectual Property (IP), or Proprietary Data (PD). SiberSci, LLC will provide an NDA for review, negotiation, and amendment by the client to safeguard and protect their IP and PD. SiberSci, LLC will also provide a budgetary quotation and schedule for performing the client-defined Microwave Consulting effort after reviewing the performance and size requirements. Work on the Microwave Consulting project commences when a contract has been negotiated and legally executed by SiberSci, LLC and the client.